B&B Electronics Asynchronous to Synchronous Converter 2010 Bedienungsanleitung PDF herunterladen (Seite 8)

6 2010AS3297 Manual

B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350

PH (815) 433-5100 -- FAX (815) 434-7094

4.0 INSTALLATION

The Model 2010 is designed to be used in

pairs

, with one unit installed

between an asynchronous DTE and a synchronous DCE on either end of a

synchronous communication link. Figure 4 (below) illustrates a typical

Model 2010 installation.

Figure 4. Typical Model 2010 application

4.1 CONNECTING THE ASYNCHRONOUS PORT

The asynchronous port of the Model 2010 is a DB-25 female and is

configured as "DCE". Therefore, it wants to talk to a DTE device such as a

terminal or PC. The Model 2010 may be plugged directly into the DB-25

serial port of a DTE or connected via "straight through" cable.

4.2 CONNECTING THE SYNCHRONOUS PORT

The synchronous port of the Model 2010 is a DB-25 male and is

configured as "DTE." Therefore, it wants to talk to a DCE device such as a

modem or multiplexer. The Model 2010 may be plugged directly into the

DB-25 serial port of a DCE or connected via "straight through" cable.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

B&B Electronics Asynchronous to Synchronous Converter 2010 Bedienungsanleitung Seite 8