B&B Electronics ESR902 Betriebsanweisung PDF herunterladen (Seite 3)

Required Serial Settings

Use the following serial port settings to

allow the communication device to

interface with the Opticom™ Infrared

System phase selector:

Model 752 / 754

Infrared

Phase Selectors

Model 1000

GPS

Phase Selectors

1

Baud rate

9600

115,200

Parity

None

None

Data bits

8

8

Flow control

None

None

Cabling

For devices with DB-9 connectors, use

these cables to connect between the

device’s serial port and the phase

selector:

Model 752 / 754

Infrared Phase

Selectors

Model 1000 GPS

Phase Selectors

2

Cable

DB-9 to 6-pin mini-

DIN serial

communications

cable (GTT model

C50005)

DB-9 to DB-9

serial

communications

cable

Some devices require different cables

and/or additional adapters; see the

“Cabling” section for the device.

All serial device servers included in this

document use a standard Ethernet cable

for connecting the Ethernet port to your

network.

1,2 This information on Opticom GPS phase

selectors is provided for reference only. These

devices were not included in the GTT lab

testing as they were not yet supported by

Opticom™ Central Management Software.

1 2 3 4 5 6 7 8 ... 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare